Food grade water pumps use materials that can directly contact food must be food grade, generally they are pumps made of food grade stainless steel or other food grade materials.

High temperature brushless DC Food grade water pump can do:

1. The material is FDA-certified ABS material, more rest assured! To

2. Combining the characteristics of the brushless DC pump can increase the efficiency by 20%, and the cavity structure can be cleaned without disassembly and assembly;

3.Food grade water pump liquid flows out from the center of the motor, which can reduce the temperature rise generated during the operation of the motor and extend the service life; no lubricating grease is added; the bearing structure of the water pump does not have any grease or lubricant, which will not cause safety hazards to food;

4. The hybrid pump structure design that combines axial flow and centrifugal flow meets the high-efficiency heat dissipation effect of the food grade water pump itself. The motor and rotor isolation screen structure is adopted to achieve natural lubrication effect when the pump is working.

Food grade water pump standards and materials available:

Only when the materials used to make the food grade water pump reach food-grade certification, there is also a food-grade certification for the whole pump. Food protection should have all the technical properties required to protect food, such as corresponding air permeability, moisture permeability, chemical stability, physical and mechanical properties, sealing (measured with a sealing tester), shading, and aroma retention. Adaptability of production process It can meet the requirements of packaging mechanization and automated production process, such as material sterilization, molding, etc. It is basically food-grade, safe, non-toxic and environmentally friendly, generally costly, but safe, environmentally friendly and healthy

Features of food grade water pump products:

1. Long life, no maintenance, small size, high efficiency, low power consumption, strong anti-interference ability, and stable operation;

2. No carbon brush, no pollution, electronic commutation, long life;

3. The stator and circuit board of the motor are potted with epoxy resin and completely isolated from the rotor, which solves the leakage problem caused by long-term diving of the motor-type DC water pump. It can be installed underwater and is completely waterproof;

4. Food grade water pump parameters can be adjusted according to customer requirements. The 24V pump can be adjusted with a head of 2 meters or a head of 7 meters, with the same volume and wide voltage operation;

5. Food grade water pump shaft adopts high-performance ceramic shaft (stainless steel shaft is optional for cost reduction), which has high accuracy and good wear resistance. Because the water pump adopts the precision matching of high-precision shaft sleeve and ceramic shaft (reduced cost, other materials can be replaced), noise Low, the noise with lower power can even reach below 30 decibels;

6. The three-phase hallless program-driven DC pump in the water pump series can realize PWM speed control, analog signal (0~5V) speed control, potentiometer VR manual speed control, so that the flow and head can be adjusted, and music can be customized fountain;

food grade water pump 12v,food grade electric transfer pump,food grade pump dispenser,food grade transfer pumps,high viscosity food grade pump,food grade pump bottle